APRILIA ETV MILLE CAPONORD - ETV MILLE CAPONORD ABS - 2006 Use And Maintenance Book page 277

5 6
7
4
8
km/h
3
9
2
10
1
0
km
TIME
2
SWITCHING FROM TOTAL TO PARTIAL
KILOMETRE (MILE) ODOMETER
Left display
Press and release the button SET (1);
◆
t h e r e l e v a n t t o t a l p a r t i a l o r t o t a l
kilometres (miles) covered will appear on
the display.
NOTE
Whenever the ignition switch is
turned to position ≈>∆, the display always
indicates the total number of kilometres
(miles) covered.
To set the partial kilometre (mile)
odometer to zero, proceed as follows:
◆
Display the partial number of kilometres
covered, see above.
Press the button SET (1) for more than
◆
three seconds; the segments (2) are set
to zero.
T AIR
C
ENGINE
CONTROL
MODE SET SET
DIAGNOSIS
1
SETTING THE CLOCK (HOURS AND
MINUTES)
NOTE
carried out only with the vehicle at rest.
Press the MODE (3) push button for
◆
more than three seconds, the segments
corresponding to the hours (4) will blink.
NOTE
and released, the data are changed one by
one; if the button SET (1) is kept pressed,
the data change scrolling quickly and
cyclically.
Press the SET (1) push button and
◆
select the desired hour.
◆
To confirm the time setting, press and
release the button MODE (3), and the
minute segments (5) will blink.
Press the SET (1) push button and
◆
select the desired minutes.
T AIR
L
5
4
C
TIME
ENGINE
CONTROL
MODE MODE SET SET
DIAGNOSIS
3 1
The setting of the clock can be
If the button SET (1) is pressed
◆
To confirm the minute setting, press and
release the MODE (3) push button.
NOTE
If the battery is removed, the
clock is set to zero.
use and maintenance ETV mille Caponord ABS
21