ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual page 725

To access this screen, log in to the Web Configurator, and click Configuration >
Object > Service > Service Group.
Figure 469 Configuration > Object > Service > Service Group
The following table describes the labels in this screen. See
726 for more information as well.
Table 200 Configuration > Object > Service > Service Group
LABEL
Add
Edit
Remove
Object
References
#
Name
Description
ZyWALL USG 1000 User's Guide
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Select an entry and click Object References to open a screen that
shows which settings use the entry. See
an example.
This field is a sequential value, and it is not associated with a specific
service group.
This field displays the name of each service group.
By default, the ZyWALL uses services starting with "Default_Allow_" in
the firewall rules to allow certain services to connect to the ZyWALL.
This field displays the description of each service group, if any.
Chapter 42 Services
Section 42.3.1 on page
Section 13.3.2 on page 291 for
725