ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual page 874

Chapter 52 File Manager
Table 255 Maintenance > File Manager > Shell Script (continued)
LABEL
Copy
Run
#
File Name This column displays the label that identifies a shell script file.
Size
Last
Modified
Upload
Shell
Script
File Path
Browse...
Upload
874
DESCRIPTION
Use this button to save a duplicate of a shell script file on the ZyWALL.
Click a shell script file's row to select it and click Copy to open the Copy File
screen.
Figure 565 Maintenance > File Manager > Shell Script > Copy
Specify a name for the duplicate file. Use up to 25 characters (including a-zA-
Z0-9;'~!@#$%^&()_+[]{}',.=-).
Click OK to save the duplicate or click Cancel to close the screen without
saving a duplicate of the configuration file.
Use this button to have the ZyWALL use a specific shell script file.
Click a shell script file's row to select it and click Run to have the ZyWALL use
that shell script file. You may need to wait awhile for the ZyWALL to finish
applying the commands.
This column displays the number for each shell script file entry.
This column displays the size (in KB) of a shell script file.
This column displays the date and time that the individual shell script files
were last changed or saved.
The bottom part of the screen allows you to upload a new or previously saved
shell script file from your computer to your ZyWALL.
Type in the location of the file you want to upload in this field or click Browse
... to find it.
Click Browse... to find the .zysh file you want to upload.
Click Upload to begin the upload process. This process may take up to
several minutes.
ZyWALL USG 1000 User's Guide