ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual page 229

Table 31 Monitor > System Status > Interface Status (continued)
LABEL
IP Addr/
Netmask
IP Assignment
Services
Action
Interface
Statistics
Refresh
Expand/Close
Name
Status
TxPkts
RxPkts
Tx B/s
Rx B/s
ZyWALL USG 1000 User's Guide
DESCRIPTION
This field displays the current IP address and subnet mask assigned to
the interface. If the IP address and subnet mask are 0.0.0.0, the
interface is disabled or did not receive an IP address and subnet mask
via DHCP.
If this interface is a member of an active virtual router, this field displays
the IP address it is currently using. This is either the static IP address of
the interface (if it is the master) or the management IP address (if it is a
backup).
This field displays how the interface gets its IP address.
Static - This interface has a static IP address.
DHCP Client - This interface gets its IP address from a DHCP server.
Dynamic - This is the auxiliary interface.
This field lists which services the interface provides to the network.
Examples include DHCP relay, DHCP server, DDNS, RIP, and OSPF.
This field displays n/a if the interface does not provide any services to
the network.
Use this field to get or to update the IP address for the interface. Click
Renew to send a new DHCP request to a DHCP server. Click Connect to
try to connect the auxiliary interface or a PPPoE/PPTP interface. If the
interface cannot use one of these ways to get or to update its IP
address, this field displays n/a.
This table provides packet statistics for each interface.
Click this button to update the information in the screen.
Click this button to show or hide statistics for all the virtual interfaces on
top of the Ethernet interfaces.
This field displays the name of each interface. If there is a Expand icon
(plus-sign) next to the name, click this to look at the statistics for
virtual interfaces on top of this interface.
This field displays the current status of the interface.
Down - The interface is not connected.
Speed / Duplex - The interface is connected. This field displays the
port speed and duplex setting (Full or Half).
This field displays the number of packets transmitted from the ZyWALL
on the interface since it was last connected.
This field displays the number of packets received by the ZyWALL on the
interface since it was last connected.
This field displays the transmission speed, in bytes per second, on the
interface in the one-second interval before the screen updated.
This field displays the reception speed, in bytes per second, on the
interface in the one-second interval before the screen updated.
Chapter 10 Monitor
229