ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual page 134

Chapter 7 Tutorials
Click Configuration > Object > AAA Server > RADIUS. Double-click the
1
radius entry. Configure the RADIUS server's address authentication port (1812 if
you were not told otherwise), key, and click Apply.
Figure 79 Configuration > Object > AAA Server > RADIUS > Add
Click Configuration > Object > Auth. method. Double-click the default entry.
2
Click the Add icon. Select group radius because the ZyWALL should use the
specified RADIUS server for authentication. Click OK.
Figure 80 Configuration > Object > Auth. method > Add
Click Configuration > Auth. Policy. In the Authentication Policy Summary
3
section, click the Add icon.
Set up a default policy that forces every user to log in to the ZyWALL before the
4
ZyWALL routes traffic for them. Select Enable. Set the Authentication field to
required, and make sure Force User Authentication is selected. Keep the rest
of the default settings, and click OK.
134
ZyWALL USG 1000 User's Guide