Vpn Advanced Wizard - Scenario - ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual

5.5.4 VPN Advanced Wizard - Scenario

Click the Advanced radio button as shown in
following screen.
Figure 50 VPN Advanced Wizard: Scenario
Rule Name: Type the name used to identify this VPN connection (and VPN
gateway). You may use 1-31 alphanumeric characters, underscores (_), or dashes
(-), but the first character cannot be a number. This value is case-sensitive.
Select the scenario that best describes your intended VPN connection. The figure
on the left of the screen changes to match the scenario you select.
• Site-to-site - Choose this if the remote IPSec device has a static IP address or a
domain name. This ZyWALL can initiate the VPN tunnel.
• Site-to-site with Dynamic Peer - Choose this if the remote IPSec device has a
dynamic IP address. Only the remote IPSec device can initiate the VPN tunnel.
• Remote Access (Server Role) - Choose this to allow incoming connections from
IPSec VPN clients. The clients have dynamic IP addresses and are also known as
dial-in users. Only the clients can initiate the VPN tunnel.
ZyWALL USG 1000 User's Guide
Chapter 5 Quick Setup
Figure 45 on page 82 to display the
87