The Packet Capture Files Screen - ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual

Chapter 53 Diagnostics
Table 258 Maintenance > Diagnostics > Packet Capture (continued)
LABEL
Capture
Stop
Reset

53.3.1 The Packet Capture Files Screen

Click Maintenance > Diagnostics > Packet Capture > Files to open the
packet capture files screen. This screen lists the files of packet captures stored on
the ZyWALL or a connected USB storage device. You can download the files to
your computer where you can study them using a packet analyzer (also known as
a network or protocol analyzer) such as Wireshark.
Figure 569 Maintenance > Diagnostics > Packet Capture > Files
The following table describes the labels in this screen.
Table 259 Maintenance > Diagnostics > Packet Capture > Files
LABEL
Remove
Download
880
DESCRIPTION
Click this button to have the ZyWALL capture packets according to
the settings configured in this screen.
You can configure the ZyWALL while a packet capture is in progress
although you cannot modify the packet capture settings.
The ZyWALL's throughput or performance may be affected while a
packet capture is in progress.
After the ZyWALL finishes the capture it saves a separate capture
file for each selected interface. The total number of packet capture
files that you can save depends on the file sizes and the available
flash storage space. Once the flash storage space is full, adding
more packet captures will fail.
Click this button to stop a currently running packet capture and
generate a separate capture file for each selected interface.
Click this button to return the screen to its last-saved settings.
DESCRIPTION
Select files and click Remove to delete them from the ZyWALL. Use the
[Shift] and/or [Ctrl] key to select multiple files. A pop-up window asks you
to confirm that you want to delete.
Click a file to select it and click Download to save it to your computer.
ZyWALL USG 1000 User's Guide