The Vpn Connection Add/Edit (Ike) Screen - ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual

Chapter 25 IPSec VPN
Table 119 Configuration > VPN > IPSec VPN > VPN Connection (continued)
LABEL
#
Status
Name
VPN Gateway
Encapsulation
Algorithm
Policy
Apply
Reset

25.2.1 The VPN Connection Add/Edit (IKE) Screen

The VPN Connection Add/Edit Gateway screen allows you to create a new VPN
connection policy or edit an existing one. To access this screen, go to the
Configuration > VPN Connection screen (see
click either the Add icon or an Edit icon. If you click the Add icon, you have to
select a specific VPN gateway in the VPN Gateway field before the following
screen appears.
448
DESCRIPTION
This field is a sequential value, and it is not associated with a specific
connection.
The activate (light bulb) icon is lit when the entry is active and dimmed
when the entry is inactive.
The connect icon is lit when the interface is connected and dimmed when
it is disconnected.
This field displays the name of the IPSec SA.
This field displays the associated VPN gateway(s). If there is no VPN
gateway, this field displays "manual key".
This field displays what encapsulation the IPSec SA uses.
This field displays what encryption and authentication methods,
respectively, the IPSec SA uses.
This field displays the local policy and the remote policy, respectively.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Section 25.2 on page
ZyWALL USG 1000 User's Guide
446), and