Tutorials; Chapter 7 Tutorials; How To Configure Interfaces, Port Grouping, And Zones; Technical Reference - ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual

C
H A P T E R
Here are examples of using the Web Configurator to set up features in the
ZyWALL. See also
Note: The tutorials featured here require a basic understanding of connecting to
and using the Web Configurator, see
descriptions of individual screens, see
7.1 How to Configure Interfaces, Port Grouping,
and Zones
This tutorial shows how to configure Ethernet interfaces, port grouping, and zones
for the following example configuration (see
default configuration).
• Interface ge2 uses a static IP address of 1.2.3.4 and is in the WAN zone.
• DMZ servers are connected to ports P4 and P5 and need full wire speed
communication with each other, so ports P4 and P5 are combined into a ge4
interface port group. It uses IP address 192.168.2.1.
ZyWALL USG 1000 User's Guide
Chapter 8 on page 169
Chapter 3 on page 47
Technical Reference on page

Tutorials

for an example of configuring L2TP VPN.
for details. For field
Section 6.2.2 on page 96
7
207.
for the
117