Example Of Viewing A Packet Capture File - ZyXEL Communications ZYWALL USG 1000 - EDITION 2 Manual

Table 259 Maintenance > Diagnostics > Packet Capture > Files (continued)
LABEL
#
File Name
Size
Last
Modified

53.3.2 Example of Viewing a Packet Capture File

Here is an example of a packet capture file viewed in the Wireshark packet
analyzer. Notice that the size of frame 15 on the wire is 1514 bytes while the
captured size is only 1500 bytes. The ZyWALL truncated the frame because the
capture screen's Number Of Bytes To Capture (Per Packet) field was set to
1500 bytes.
Figure 570 Packet Capture File Example
ZyWALL USG 1000 User's Guide
DESCRIPTION
This column displays the number for each packet capture file entry. The
total number of packet capture files that you can save depends on the file
sizes and the available flash storage space.
This column displays the label that identifies the file. The file name format is
interface name-file suffix.cap.
This column displays the size (in bytes) of a file.
This column displays the date and time that the individual files were saved.
Chapter 53 Diagnostics
881