Edit Static Route; Table 50 Configuration > Static Route - ZyXEL Communications VANTAGE CNM User Manual
Centralized network management
Hide thumbs
Also See for VANTAGE CNM:
- User manual (484 pages) ,
- Quick start manual (36 pages) ,
- Quick start manual (69 pages)
Table of Contents
Advertisement
Vantage CNM User's Guide
Figure 71 Configuration > Static Route
Table 50 Configuration > Static Route
LABEL
Index
Name
Active
Destination
Gateway
Next
Edit
Apply
Reset
10.1.2 Edit Static Route
149
DESCRIPTION
This is the number of an individual entry. You may select a rule to edit or delete it.
This is the name that describes or identifies this route. To delete a static route,
erase the name and then click apply.
This field shows whether this static route is active or not.
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
This is the IP address of the gateway. The gateway is an immediate neighbor of the
ZyXEL device that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as the ZyXEL device; over the
WAN, the gateway must be the IP address of one of the remote nodes.
Select a page number or Next to view a particular page or next page of server
entries respectively.
Click a static route index number and then click Edit to set up a static route on the
ZyXEL device.
Click Apply to save your changes back to the ZyXEL device.
Click Reset to begin configuring this screen afresh.
Chapter 10 Configuration > Static Route
Advertisement
Table of Contents
