Add/Edit Source/Destination Ip Addresses; Figure 80 Configuration >Firewall > Ip Address; Table 67 Configuration >Firewall > Ip Address - ZyXEL Communications VANTAGE CNM User Manual

Vantage CNM User's Guide
Table 66 Configuration >Firewall > Edit (continued)
LABEL
Custom Port
Add
Edit
Delete
Apply
Cancel

12.5.4 Add/Edit Source/Destination IP Addresses

Click Add or Edit under Source Address or Destination Address to add or edit a source or
destination IP address.
Figure 80 Configuration >Firewall > IP Address
The following table describes the labels in this screen.
Table 67 Configuration >Firewall > IP Address
LABEL
Address Type
Start IP Address
End IP Address
Subnet Mask
Apply
Cancel
187
Click this button to bring up the screen that you use to configure a new custom
service that is not in the predefined list of services.
Select a custom service (denoted by an *) from the Available Services list and
click this button to edit the service.
Select a custom service (denoted by an *) from the Available Services list and
click this button to remove the service.
Click Apply to save the current rule setting to the device.
Click Cancel to exit this screen without saving,
DESCRIPTION
Do you want your rule to apply to packets with a particular (single) IP, a range of IP
addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP address?
Select an option from the drop-down list box that includes: Single Address,
Range Address, Subnet Address and Any Address.
Enter the single IP address or the starting IP address in a range here.
Enter the ending IP address in a range here.
Enter the subnet mask here, if applicable.
Click Apply to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
DESCRIPTION
Chapter 12 Configuration > Firewall