Table 60 Icmp Commands That Trigger Alerts - ZyXEL Communications VANTAGE CNM User Manual

Vantage CNM User's Guide
Weaknesses in the TCP/IP specification leave it open to "SYN Flood" and "LAND" attacks.
These attacks are executed during the handshake that initiates a communication session
between two applications. Under normal circumstances, the application that initiates a session
sends a SYN (synchronize) packet to the receiving server. The receiver sends back an ACK
(acknowledgment) packet and its own SYN, and then the initiator responds with an ACK
(acknowledgment). After this handshake, a connection is established.
3 Brute-force attacks that flood a network with useless data.
A brute-force attack, such as a "Smurf" attack, targets a feature in the IP specification known
as directed or subnet broadcasting, to quickly flood the target network with useless data. A
Smurf hacker floods a router with Internet Control Message Protocol (ICMP) echo request
packets (pings). Since the destination IP address of each packet is the broadcast address of the
network, the router will broadcast the ICMP echo request packet to all hosts on the network. If
there are numerous hosts, this will create a large amount of ICMP echo request and response
traffic. If a hacker chooses to spoof the source IP address of the ICMP echo request packet, the
resulting ICMP traffic will not only clog up the "intermediary" network, but will also congest
the network of the spoofed source IP address, known as the "victim" network. This flood of
broadcast traffic consumes all available bandwidth, making communications impossible.
ICMP is an error-reporting protocol that works in concert with IP. The following ICMP types
trigger an alert:

Table 60 ICMP Commands That Trigger Alerts

13
5
14
17
18
• Illegal Commands (NetBIOS and SMTP)
173
• SYN Attack floods a targeted system with a series of SYN packets.
Each packet causes the targeted system to issue a SYN-ACK
response. While the targeted system waits for the ACK that follows
the SYN-ACK, it queues up all outstanding SYN-ACK responses on
what is known as a backlog queue. SYN-ACKs are moved off the
queue only when an ACK comes back or when an internal timer
(which is set at relatively long intervals) terminates the three-way
handshake. Once the queue is full, the system will ignore all
incoming SYN requests, making the system unavailable for
legitimate users.
• In a LAND Attack, hackers flood SYN packets into the network with
a spoofed source IP address of the targeted system. This makes it
appear as if the host computer sent the packets to itself, making the
system unavailable while the target system tries to respond to itself.
• ICMP Vulnerability
TIMESTAMP_REQUEST
REDIRECT
TIMESTAMP_REPLY
ADDRESS_MASK_REQUEST
ADDRESS_MASK_REPLY
Chapter 12 Configuration > Firewall