Configuring Sua Servers - Prestige; Figure 66 Configuration > Nat > Sua Server - Prestige; Table 45 Configuration > Nat > Sua Server - Prestige - ZyXEL Communications VANTAGE CNM User Manual

Select a radio button and then click Edit to configure that server set.
9.3.3 Configuring SUA Servers – Prestige
Select SUA Only in
Figure 66 Configuration > NAT > SUA Server – Prestige
The following table describes the labels in this screen.
Table 45 Configuration > NAT > SUA Server – Prestige
LABEL
Index
Default Server
Start Port
End Port
Server IP
Address
Apply
Cancel
Chapter 9 Configuration > NAT
Figure 64 on page 137
DESCRIPTION
This is the number of an individual SUA server entry.
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen. If
you do not assign a default server IP address, then all packets received for ports not
specified in this screen or remote management will be discarded.
Type the start and end port numbers that define the service that will be forwarded to
the inside server specified in the next field.
Type the IP address of the inside server.
Click Apply to save your changes back to the ZyXEL device.
Click Cancel to return to the previous screen.
Vantage CNM User's Guide
and then click Edit to bring up the next screen.
140