Wan Backup - Prestige; Traffic Redirect; Configuring Wan Backup - Prestige - ZyXEL Communications VANTAGE CNM User Manual

Centralized network management
Hide thumbs Also See for VANTAGE CNM:
Table of Contents

Advertisement

Table 37 Configuration > WAN > Setup – Prestige – Routing Mode (continued)
LABEL
IP Address
Connection
(PPPoA and PPPoE
encapsulation only)
Nailed-Up Connection
Connect on Demand
Max Idle Timeout
Apply
Reset

8.4.3 WAN Backup - Prestige

The CON/AUX port on the Prestige can be used in reserve, as a traditional dial-up connection
should the WAN port connection fail. To set up the auxiliary port (AUX) for the Prestige for
use in the event that the regular WAN connection is dropped, first make sure you have set up
the switch and port connections.

8.4.3.1 Traffic Redirect

See
page 113

8.4.4 Configuring WAN Backup - Prestige

To change your Prestige's WAN backup settings, click WAN, then Backup. The screen
appears as shown.
Chapter 8 Configuration > WAN
DESCRIPTION
This option is available if you select Routing in the Mode field.
A static IP address is a fixed IP that your ISP gives you. A dynamic IP
address is not fixed; the ISP assigns you a different one each time you
connect to the Internet. The Single User Account feature can be used with
either a dynamic or static IP address.
Select Obtain an IP Address Automatically if you have a dynamic IP
address; otherwise select Static IP Address and type your ISP assigned
IP address in the IP Address field below.
The schedule rule(s) in SMT menu 26 have priority over your Connection
settings.
Select Nailed-Up Connection when you want your connection up all the
time. The Prestige will try to bring up the connection automatically if it is
disconnected.
Select Connect on Demand when you don't want the connection up all
the time and specify an idle time-out in the Max Idle Timeout field.
Specify an idle time-out in the Max Idle Timeout field when you select
Connect on Demand. The default setting is 0, which means the Internet
session will not timeout.
Click Apply to save the changes.
Click Reset to begin configuring this screen afresh.
for more information on traffic redirect.
Vantage CNM User's Guide
126

Advertisement

Table of Contents
loading

Table of Contents