Figure 75 Configuration > Vpn > Manual Tunnel Ipsec Detail; Table 58 Configuration > Vpn >Manual Tunnel Ipsec Detail - ZyXEL Communications VANTAGE CNM User Manual

Figure 75 Configuration > VPN > Manual Tunnel IPSec Detail
The following table describes the labels in this screen.
Table 58 Configuration > VPN >Manual Tunnel IPSec Detail
LABEL
Name
Enable
IKE / Manual
DNS Address
A-End / Z-End
A-End / Z-End Device
My IP
Chapter 11 Configuration > VPN
Type up to 32 characters to identify this VPN policy. You may use any
character, including spaces, but the ZyXEL device drops trailing
spaces.
Select this check box to activate this VPN policy.
Select IKE or Manual. Manual is a useful option for troubleshooting if
you have problems using IKE key management.
Type a domain name (up to 31 characters) by which to identify the
local or remote IPSec router.
Local / Remote IP addresses must be static and correspond to the
remote IPSec router's configured remote IP addresses.
Two active SAs cannot have the local and remote IP address(es) both
the same. Two active SAs can have the same local or remote IP
address, but not both. You can configure multiple SAs between the
same local and remote IP addresses, as long as only one is active at
any time.
Select the name of the ZyXEL device from the pull-down list.
This is the IP address of the local and remote computer(s) of the VPN
tunnel.
Vantage CNM User's Guide
DESCRIPTION
166