Import From An Xml Registration File; Figure 17 Device > Registration > Manual Registration; Table 8 Device > Registration > Manual Registration - ZyXEL Communications VANTAGE CNM User Manual

Vantage CNM User's Guide
Figure 17 Device > Registration > Manual Registration
The following table describes the fields in this screen
Table 8 Device > Registration > Manual Registration
LABEL
MAC (Hex)
Name
Device Type
Set Vantage CNM
configuration to
device
Get configuration
from the device
Encryption Methods
Encryption Key
Back
Finish

3.3.2 Import From an XML Registration File

Use this method when you want to register multiple ZyXEL devices at one time. The file
should be in XML format containing the fields shown in the manual registration screen for
each device.
First create an XML file. Some XML templates for each device type supported at the time may
be found at "vantage installed path\xml\". You may combine different templates into one
XML file so as to import multiple devices (and of different types) in one go.
53
DESCRIPTION
Enter the LAN MAC address of the ZyXEL device (without colons) in this field.
Vantage uses the MAC address to identify the ZyXEL device, so make sure it is
entered correctly.
Enter a unique name here for the ZyXEL device for identification purposes. The
device name cannot exceed ten characters.
Select the ZyXEL device type from the pull-down menu.
Select this radio button to have Vantage push all current configurations from
Vantage to the device. The current device configuration is then reset to the
configuration settings that Vantage contains.
Select this radio button to have Vantage pull all current device configurations into
Vantage. The current device configuration "overwrites" Vantage configurations.
The encryption options at the time of writing are DES and 3DES. Choose from
None (no encryption), DES or 3DES. The ZyXEL device must be set to the same
encryption mode (and have the same encryption key) as the Vantage server.
Type an eight-character alphanumeric ("0" to "9", "a" to "z" or "A" to "Z") for DES
encryption and a 24-character alphanumeric ("0" to "9", "a" to "z" or "A" to "Z") for
3DES encryption.
Click Back to return to the previous screen.
Click Finish to go to the Device Registration Finished screen.
Chapter 3 Device Menus