System; Figure 33 Configuration > General > System - Zywall; Table 13 Configuration > General > System - Zywall - ZyXEL Communications VANTAGE CNM User Manual

Vantage CNM User's Guide

4.2.1 System

Figure 33 Configuration > General > System – ZyWALL
The following table describes the fields in this screen
Table 13 Configuration > General > System – ZyWALL
FIELD
Password
MAC (Hex)
Device Type
Encryption Mode
67
DESCRIPTION
Enter the password used to access the device.
This field displays the LAN MAC address of the ZyXEL device. Vantage uses
the MAC address to identify the ZyXEL device. This is entered when you
manually register the ZyXEL device.
This field displays the ZyXEL device type selected in the object tree.
You may choose to encrypt traffic between the ZyXEL device and the Vantage
server here. Choose from None (no encryption), DES or 3DES. The ZyXEL
device must be set to the same encryption mode (and have the same
encryption key) as the Vantage server.
You do not need to add NAT or firewall rules when you encrypt this traffic.
To set the encryption mode on the ZyXEL device, do the following:
Go to CI mode (SMT 24.8 for devices with SMT menus)
Type 'CNM encrymode X' where:
Value of X Encryption Mode
0 None
1 DES
2 3DES
Chapter 4 Configuration > Select Device BB & General