Log Search; Figure 190 Log Search; Table 152 Log Search - ZyXEL Communications VANTAGE CNM User Manual

Vantage CNM User's Guide

27.2 Log Search

You can search for logs by specific criteria ((date, time, port, category, log message or device
LAN MAC address) select a ZyXEL device(s) and then click Report, Log Viewer, Search.
Fill in the search criteria as shown in this screen.

Figure 190 Log Search

Table 152
LABEL
Start Date
Start Time
End Date
End Time
Source: Port
Destination: Port
Category
Message Text
Device ID
Apply
Reset
319
Log Search
DESCRIPTION
Click the calendar icon to select a beginning year-month-date or manually
enter the date in year-month-date format.
Enter the time from which to start searching for logs in hour-minute-second
format in this screen.
Click the calendar icon to select an ending year-month-date or manually enter
the date in year-month-date format. The end date must come after the start
date but not after the current date.
Enter the time to which to start searching for logs in hour-minute-second
format in this screen.
Enter the source port of the (ZyXEL device) generated log.
Enter the destination port of the (ZyXEL device) generated log.
Select the type of log generated from the drop-down list box
Select key log message text for which to search additional information on the
reason the log was generated.
This field displays the LAN MAC address of the device that caused the ZyXEL
device to generate a log.
Click Apply to begin your log search. The search result is then displayed.
Click Reset to begin configuring the screen afresh.
(see Table 151).
Chapter 27 Log Viewer