This chapter covers the information and diagnostic tools in SMT menus 24.1 to 24.4.
These tools include updates on system status, port status, log and trace capabilities and
upgrades for the system software. This chapter describes how to use these tools in detail.
Type 24 in the main menu to open Menu 24 – System Maintenance, as shown in the
following figure.
Figure 206 Menu 24 System Maintenance
35.1 System Status
The first selection, System Status gives you information on the status and statistics of the
ports, as shown next
Prestige. Specifically, it gives you information on your ADSL telephone line status, number of
packets sent and received.
To get to System Status, type 24 to go to Menu 24 — System Maintenance. From this menu,
type 1. System Status. There are two commands in Menu 24.1 — System Maintenance —
Status. Entering 1 resets the counters; [ESC] takes you back to the previous screen.
The following table describes the fields present in Menu 24.1 — System Maintenance —
Status which are read-only and meant for diagnostic purposes.
Chapter 35 System Information and Diagnosis
System Information and
Menu 24 - System Maintenance
1.
System Status
2.
System Information and Console Port Speed
3.
Log and Trace
Figure 207
. System Status is a tool that can be used to monitor your
C
H A P T E R
Diagnosis
P-335 Series User's Guide
3 5
367