Quick Setup - Runco CL-420 Owner's Operating Manual

Table 3-1 gives a quick overview of the CL-410/CL-420 installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video
Note
installation specialist.
Table 3-1. Installation Overview
Step
1 Choose a location for the projector
2 Connect signal sources to the projector
3 Connect external controller to RS-232 port (optional)
4 Apply power to the projector
5 For rear-screen and/or ceiling-mount installations, select
the proper picture orientation
6 Lens adjustments: projected image size (zoom), position
(shift) and focus
7 Projector calibration: adjust the following for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
Runco CL-410 and CL-420 Owner's Operating Manual
Procedure
For Details, refer to
page...
14
20
25
27
28
16, 29
32 through 41
13
Installation
3.2

Quick Setup