Runco CL-420 Owner's Operating Manual page 17

1. COMPOSITE VIDEO INPUT
Standard composite video input for connecting a VCR, camcorder, laser disc player
or other composite video source.
2. S-VIDEO
Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS
(S-VHS) VCR.
3. COMPONENT VIDEO (RCA connectors)
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component
input. This is the input for component video from sources such as DVD players.
For best results, do not run your DVD player in progressive mode.
Tip
4. RGB HD
A 15-pin VGA connection to a personal computer or HD tuner with an RGB output.
The CL-410/CL-420 automatically detects the signal resolution: 480p, 576i, 720p or
1080i.
5. HDMI / Computer Input (Digital)
HDCP-compliant digital video input for connecting a DVD player, personal computer
or HD tuner with a DVI or HDMI output.
6. POWER INPUT (100 to 240 VAC)
Connect the CL-410/CL-420 to power here.
7. RS-232 CONTROL PORT
A female, 9-pin D-sub connector for interfacing with a PC or home theater
automation/control system.
8. 12-VOLT TRIGGER (3.5-mm mini phono jack; Tip = +12V; Sleeve = Ground)
For connecting to retractable screens or other devices that respond to 12-volt
triggers. Outputs +12 volts / 250 milliamps when the projector is turned on.
9. LAMP COVER
10. EXHAUST VENT
Runco CL-410 and CL-420 Owner's Operating Manual 7
Controls and Functions