Installation
3.2
Quick Setup
Table 3-1 gives a quick overview of the VX-2 installation process. The sections following
this one provide detailed instructions.
Installation should be performed by a qualified custom video
Note
installation specialist.
Table 3-1. Installation Overview
Step
Choose a location for the projector
1
Install CineWide (secondary anamorphic) lens (optional)
2
Connect the DHD Controller to the projector
3
Connect signal sources to the DHD Controller
4
Connect external controller to RS-232 port (optional)
5
Connect other home theater components to 12-volt trigger
6
outputs (optional)
7
Apply power to the projector
For rear-screen and/or ceiling-mount installations, select
8
the proper picture orientation
Lens adjustments: projected image size (zoom), position
9
(shift) and focus
Projector calibration: adjust the following for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
10
• Contrast
• Color level
• Tint
• Input position
Procedure
18
Runco VX-2c/VX-2dc Owner's Operating Manual
For Details, Refer to
page...
19
25
27
28
32
32
33, 35
35
22, 36
39 through 46