Specifications; Cl-410/Cl-420 Specifications - Runco CL-420 Owner's Operating Manual

Table 7-1 lists the CL-410/CL-420 specifications.
Table 7-1. CL-410/CL-420 Specifications
Projector Type:
Native Resolution:
Aspect Ratios:
Video Standards:
Scan Frequency:
Picture Size (16:9 Screen):
Throw Distance
(Factor x Screen Width):
Horizontal Offset:
Vertical Offset – CL-410:
Vertical Offset – CL-420:
Lamp:
Estimated Lamp Life:
Source Inputs:
Control Options:
RS-232 Communication
Parameters:
Runco CL-410 and CL-420 Owner's Operating Manual
Digital Light Processing (DLP), single-chip SuperOnyx™
DMD
CL-410: 1024 x 576 (16:9)
CL-420: 1280 x 720 (16:9)
4:3, Letterbox, 16:9 Anamorphic, VirtualWide, Cinema,
Virtual Cinema
NTSC, PAL, SECAM
Horizontal: 15 - 80 kHz
Vertical: 43 - 100 Hz
Recommended Width: 72 to 120 in.
Maximum Width: 150 in.
CL-410
Minimum: Screen Width x 1.37
Maximum: Screen Width x 1.67
CL-420
Minimum: Screen Width x 1.40
Maximum: Screen Width x 1.70
8% of screen width left or right
Ceiling-mounted --
60% of screen height below;
40% of screen height above
Floor-mounted --
40% of screen height below;
60% of screen height above
Ceiling-mounted --
63% of screen height below;
46% of screen height above
Floor-mounted --
46% of screen height below;
63% of screen height above
250 Watts
2000 hours
(1) Composite; (1) S-Video; (2) RCA Component (YPbPr);
(1) VGA; (1) HDMI 1.2 with HDCP
- Discrete infrared remote
- Serial commands via RS-232
9600 bps, no parity, 8 data bits, 1 stop bit, no flow control

7. Specifications

55
7.1
CL-410/CL-420
Specifications