Runco CL-420 Owner's Operating Manual page 19

6. LIGHT
Press this button to illuminate the buttons.
7. MENU
Press this button to access the on-screen display (OSD) controls.
8. Source Selection Buttons:
VIDEO
Press to switch to the Composite video input.
COMP 1 (Component 1)
Press to switch to the Component 1 (480i/576i/720p/1080i) video input.
RGB HD
Press to switch to the RGB HD input.
S-VID 1 (S-Video)
Press to switch to the S-Video input.
COMP 2 (Component 2)
Press to switch to the Component 2 (480i/576i/720p/1080i) video input.
DVI
Press to switch to the Digital Video (HDMI) input.
9. Aspect Ratio Selection Buttons:
ANA (Anamorphic)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4X3 (Standard 4:3)
Scales the input signal to fit 4:3 display mode in the center of the screen.
LETBOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 4:3 screen.
V-WIDE (VirtualWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material on a 1.78:1 (16:9) screen. The upper and lower
portions are masked.
V-CINE (Virtual Cinema)
A 2.35 image is stretched vertically in both directions to fill a 16:9 image.
Memory Preset Buttons:
10. ISF NIGHT
Press to recall settings for the current input from the "ISF Night" memory preset.
11. ISF DAY
Press to recall settings for the current input from the "ISF Day" memory preset.
12. CUST
Press to recall settings for the current input from the "Custom" memory preset.
Runco CL-410 and CL-420 Owner's Operating Manual 9
Controls and Functions