Serial Communications
Table 6-1. Serial Commands (continued)
Command
RRD00
Selects the ANAMORPHIC (16:9) aspect ratio
RRD01
Selects the STANDARD (4:3) aspect ratio
RRD02
Selects the LETTERBOX aspect ratio
RRD03
Selects the VIRTUALWIDE aspect ratio
RRD04
Selects the CINEMA (2.35:1) aspect ratio
RRD05
Selects the VIRTUAL CINEMA aspect ratio
RRE00
Turns the projector OFF
PON
Turns the projector ON
Notes:
1. All image quality settings must be made with the remote control. After the image adjustments
are complete, you can use these commands to store the settings in the selected memory.
2. The power on command (PON) will not provide an OK reply; it will instead reply with a random
character. For your automation system, simply ensure that you receive a character after the
PON command. If you do not get any reply after PON, send PON again.
Description
54
Runco CL-410 and CL-420 Owner's Operating Manual
Reply
RRDOK
RRDOK
RRDOK
RRDOK
RRDOK
RRDOK
RREOK
Random (Note 2)