Notes When Using Mics; About The Cd-Rom "Discrete Drums - Boss BR-1200CD Owner's Manual

Notes When Using Mics

Always be sure to switch the phantom power off except when connecting condenser mics requiring a phantom power supply.
Supplying phantom power to dynamic mics, audio playback equipment, and other devices that do not use phantom power may
cause damage to your equipment.
For mic specifications, please refer to the owner's manual for whatever model of mic you are using.
(BR-1200CD Phantom Power: +48 V DC, 7 mA Max.)
Phantom power is supplied to the eight XLR connectors for INPUT 1/MIC 1 and INPUT2/MIC 2 simultaneously. The phantom
power cannot be switched on or off for each connector individually.
If simultaneously using mics that require phantom power with those that don't, then connect any mic that does not need phantom
power to one of the standard
1/4" phone jacks. Phantom power is supplied only to the XLR connectors, not to the standard jacks.
To connect mics to the standard jacks, use a commercially available XLR-to-phone adapter cable or other form of adapter.

About the CD-ROM "Discrete Drums"

A CD-ROM is supplied with the BR-1200CD.
The CD-ROM includes a variety of drum phrases created by Discrete Drums.
These professionally recorded drum parts are saved as Loop Phrases that can easily be imported directly into the BR-1200CD and
used in your songs.
Drum phrases are categorized and sorted under each folder in .WAV format files.
The BR-1200CD allows you to easily use these phrases by using the Loop Phrase Import function.
This CD-ROM is not an Audio CD. This CD-ROM should not be played with a consumer audio CD player. If it is, very loud
noises can be generated and audio equipment such as CD players, amplifiers or speakers can be damaged!!
Since all the data included in this CD-ROM has already been factory-installed in the User bank of the Loop Phrase area of the BR-
1200CD, you can easily use the Loop Phrase functions and add the audio to your tracks without using this CD-ROM.
However, in case you initialize your hard disk drive in the BR-1200CD, or accidentally erase the User Loop Phrases, you can
recover all of the factory-installed Loop Phrases by importing them from this CD-ROM.
To import Loop Phrases from this CD-ROM, refer to "Create Loop Phrase" in "Section 4 Using Rhythm." ("Using wave
data on a CD-ROM/R/RW disc (Loop Phrase Import)" (p. 190))
For more information about the factory-installed Loop Phrases in the User Bank, which are the original WAV files on this CD-
ROM, please refer to "User Loop Phrase List" (p. 334).
7