Mastering
5. Press [F3] (BLOCK<=) to return to the Mastering Tool
Kit edit screen.
6. Press [EXIT/NO] to return to the Mastering tool Kit
Patch screen.
fig.36-03d
In order to indicate that the Mastering Tool Kit settings
have been temporarily changed, the patch number will
be displayed as "TMP." If you select a different patch,
load a different song, or turn off the BR-1200CD while
"*TMP" is being displayed, all of the patch settings will
return to their original condition. As it may not be
possible to restore these settings, due caution should be
observed.
To save your modified settings, carry out the procedure
described below in "Saving Mastering Tool Kit settings."
150
Saving Mastering Tool Kit settings
Modified effect settings are saved by writing them together
under a new patch name.
1. Press [F1] (NAME) on the Mastering Tool Kit edit
screen.
fig.36-04d
2. Move the cursor to the characters in the patch name you
want to change and select new characters using the
TIME/VALUE dial.
fig.36-04ad
3. Press [EXIT/NO] twice to return to the Mastering Tool
Kit edit screen.
4. Press [F3] (WRITE•COPY).
The Mastering Tool Kit Patch Write/Copy screen will
appear.
fig.36-05d
5. If you want to change the write destination, select a
destination patch with the TIME/VALUE dial.
This field should be left unchanged at "*TMP(CURRENT)."
If a different message is displayed, however, move the
cursor to this field and turn the TIME/VALUE dial
counterclockwise to restore "*TMP(CURRENT)."
6. Press [F3] (GO).
The Mastering Tool Kit patch will be written. When the
message "Complete!" appears, it indicates that writing
has been completed.
7. Press [EXIT/NO] several times to return to the top
screen.