Changing The Sound Of Insert Effects Using The Value Knobs; Changing Parameters Assigned To Value Knobs - Boss BR-1200CD Owner's Manual

Using insert effects
Changing the sound of insert
effects using the VALUE knobs
When you move the cursor to the right of the insert effects
patch selection screen, a screen allowing you to edit
parameters with the VALUE knobs appears.
fig.31-60
The text above each icon indicates the parameter that has
been assigned to it, and the text below each icon indicates the
current value of that parameter.
The value knobs VALUE 1 through VALUE 3 can now be
used to directly edit the values of the corresponding
parameters.
1. Press [EFFECTS].
The Effects Patch screen will appear.
fig.31-01d
2. Press CURSOR [
].
The screen allowing you to edit parameters with the
VALUE dial appears.
fig.31-60
3. Move one of the value knobs VALUE 1 through
VALUE 3.
The icon for that knob will change in response to this
movement. In addition, the value of the parameter
assigned to the knob will also change, and this will
modify the sound of the effect accordingly.
4. Move the cursor to the right again.
The screen for editing parameters with the VALUE dial
appears.
fig.03-071d
120
5. Make changes in the parameters in the same manner
with the VALUE 1–VALUE 3 knobs.
6. To save the modified sound, carry out the procedure
described below in "Saving insert effect settings" (p.
122).
Changing parameters assigned
to VALUE knobs
Use the following procedure to change the effect parameters
that are assigned to each of the VALUE knobs.
1. Press [EFFECTS].
The Effects Patch screen will appear.
fig.31-01d
2. Press CURSOR [
].
The screen allowing you to edit parameters with the
VALUE dial appears.
fig.31-60
3. Move the cursor above the icon for the parameter you
want to change.
fig.03-100d
4. Select the parameter to be assigned using the TIME/
VALUE dial.
5. To save the settings, carry out the procedure described
below in "Saving insert effect settings" (p. 122).
The parameters that can be assigned will depend on
the selected effect algorithm. For more detailed
information, refer to "Effect parameters assigned to
VALUE knobs" (p. 318).