Boss BR-1200CD Owner's Manual page 266

With Windows
8. When the "BR-1200CD" icon (or "Removable Disk (*:)"
icon) is displayed, double-click this icon.
The files and folders from the BR-1200CD's hard disk
will be displayed on the PC monitor.
In some cases, a certain amount of time will pass before
the hard disk is displayed.
9. Double-click the USB folder.
The USB folder opens. Confirm that the USB folder is
empty. The presence of any files in the USB folder will
prevent proper importation of WAV and AIFF files, so
be sure to delete any such files.
10. Drag and drop the WAV or AIFF file to be imported on
the computer to the USB folder.
Only one file can be imported at a time in each import
operation. Do not drag and drop more than one file at a
time. The import procedure cannot be carried out
correctly when two or more files are present in the USB
folder.
11. Quit the connection to the computer.
With Windows XP
In My Computer, right-click on the "BR-1200CD" icon
(or "Removable Disk (*:)" icon) to "Eject" the disk.
If this procedure fails to eject the disk, use the procedure
below
1) Click the icon in the task tray, then click the
"Stop USB Disk-drive (*:)" message displayed there.
fig.52-100
Task bar
2) Click [OK] in the "Safe To Remove Hardware" dialog
box that appears.
With Windows 2000/Me
1) In My Computer, right-click on the "BR-1200CD" icon
(or "Removable Disk (*:)" icon) to "Eject" the disk.
2) Click the icon in the task tray, then click the
"Stop USB Disk-drive (*:)" message displayed there.
fig.52-100
Task bar
266
Task tray
Task tray
3) Click [OK] in the "Safe To Remove Hardware" dialog
box that appears.
12. Press BR-1200CD's [EXIT/NO].
The WAV and/or AIFF files will be converted into audio
track data.
When this process has been completed, the USB Import
screen will be displayed once again. The WAV and/or
AIFF files will then be automatically deleted.
With certain OS, conversion will start automatically
without [EXIT/NO] having to be pressed.
13. Press BR-1200CD'S [EXIT/NO] several times to return
to the Top screen.
At this point, you can safely disconnect the USB cable
from the BR-1200CD and the computer.
If you press [EXIT/NO] without quitting the connection
to the computer, "Disconnect USB, OK?" appear. In this
case, press [ENTER/YES].
If the current song contains newly recorded audio
data or newly modified settings, the message "Save
Current?" may be displayed during the import
procedure. If you want to save your song before
starting the import, press [ENTER/YES]; if this will
not be necessary, press [EXIT/NO]. Remember that
if you do not save a modified song at this time, all
newly recorded audio data, edited data, modified
mixer settings, etc. will be lost.