Saving The Entire Contents Of The Hard Disk To A Cd-R/Rw Disc; Saving The Hard Disk Contents To A Cd-R/Rw Disc (Hdd Backup) - Boss BR-1200CD Owner's Manual

Using the CD-R/RW drive to exchange data
If the hard disk contains any data of the same type
as that being recovered, it will be completely
overwritten in the recovery process. As it will not be
possible to restore this data, care should be taken to
ensure that important data is not accidentally
overwritten in this way.
230
Saving the Entire Contents of the
Hard Disk to a CD-R/RW Disc
The BR-1200CD allows you to back up all of the data on the
internal hard disk onto CD-R/RW discs, regardless of the
type of data or the song in which it is used. Data that's been
backed up this way can later be recovered whenever needed.
Note, however, that this type of backup is limited to the data
contained in the currently selected drive or partition. If you
would also like to back up data from another drive or
partition, you will need to change the current drive first.
Note also that recovered data will be stored on the currently
selected drive.
Saving the Hard Disk Contents to
a CD-R/RW Disc (HDD Backup)
1. Insert an empty CD-R/RW disc into the BR-1200CD's
CD-R/RW drive.
The drive's access indicator will begin to flash. Wait until
this indicator stops flashing and turns off before
proceeding.
2. Press CD-R/RW [DATA SAVE/LOAD].
The Data CD Menu screen will appear.
fig.41-05d
3. Move the cursor to BACKUP icon, and press [ENTER/
YES].
Alternatively, you can press [F1] (BACKUP) if the
BACKUP icon is currently displayed.
The Backup Menu screen will appear.
fig.41-01d
4. Press [F3] (HDD).
The message "HDD Backup OK?" will appear.
fig.41-12d