Basic operation of the recorder
Using TIME/VALUE dial
A cursor is displayed below the time for the current position on the top screen. Use the TIME/VALUE dial to change
the time values and to move the current position.
fig.07-09c
1
Move the cursor to the seconds, minutes or
hours value.
fig.07-101d
Minutes
Hours
2
Turn the TIME/VALUE dial.
The current position will change in units of seconds,
minutes or hours.
42
Seconds
1,3
3
Move the cursor to the measures or beats value.
fig.07-103d
Measures Beats
4
Turn the TIME/VALUE dial.
The current position will change in units of measures
or beats. "- - -" will be displayed after measure 999.
2,4