Listening To The Demo Songs And Selecting Songs (Song Select) - Boss BR-1200CD Owner's Manual

Listening to the demo songs and selecting songs (Song Select)

When the BR-1200CD is turned on, the top song is automatically selected and all data necessary for playback is
loaded. When the loading of this data has been completed, the name of the song will be displayed.
If you wish to work on a different song, you can select that song using the following procedure. Demo songs are
stored on the BR-1200CD. Let's now select one of these songs to listen to. (Refer to the Demo Song List: p. 72.)
fig.07-05
4
1
Press [UTILITY].
The Utility Menu screen will appear.
fig.07-05d
2
Move the cursor to the SONG icon and press
[ENTER/YES].
Alternatively, you can press [F2] (SONG) if the SONG
icon is currently displayed.
The Song Menu screen will appear.
fig.07-06d
• In certain cases, the message "Save Current?" will appear during the procedure described above. This indicates that
the currently selected song contains recorded audio data and/or edited data that has not been saved. If you want to
save the song, press [ENTER/YES]; if this will not be necessary, press [EXIT/NO]. Note that if you press [EXIT/NO],
the recorded audio data and/or edited data will be lost; accordingly, be careful not to press this button by mistake.
In other cases, the message "Re-Load Current?" may appear. This indicates that although the currently selected song
contains recorded audio data and/or edited data that has not been saved, all such changes are to be discarded and the
song is to be restored to its previously saved condition. If you want to discard the changes and restore the song, press
[ENTER/YES]; if you want to cancel loading, press [EXIT/NO]. Note that if you press [ENTER/YES], the recorded
audio data and/or edited data will be lost; accordingly, be careful not to press this button by mistake.
• The demo songs contained in the BR-1200CD are intended for personal enjoyment only. Usage of these songs for any
other purpose without the permission of the copyright holder is prohibited by law. The data contained in the demo
songs may not be copied or used in secondary works without prior consent of the copyright holder.
38
3
Move the cursor to the SELECT icon and press
[ENTER/YES].
Alternatively, press [F2] (SELECT) if the SELECT icon
is currently displayed.
The Song Menu Selection screen will appear.
fig.07-07d
4
Move the cursor to the song you want to listen
to and press [F3] (GO).
The message "Now Loading..." will appear and
loading of song data from the hard disk will begin.
After a few moments, the message "Complete!" is
displayed to indicate that the data has been read.
1
2,3,4
2,3