Boss BR-1200CD Owner's Manual page 109

• As Tracks 9/10 and 11/12 are stereo tracks, it will not be
possible to select either of their mono tracks independent
of the other.
6. Press [F3] (LOC).
The screen for setting the segment to delete appears.
fig.02-0831d
7. Use [CURSOR] and the TIME/VALUE dial to specify
the erase range.
Pressing [F1] (DISP) at this time will allow you to select
how the positions will be specified (i.e., by measure,
time, or marker).
The following parameters should now be set.
START (Start point):
This parameter is used to specify the start point of the
audio data to be erased.
END (End point):
This parameter is used to specify the end point of the
audio data to be erased. If you want to set the erase
range as extending from the start to the end of the song,
press [F2] (ALL).
8. When you have made all of the necessary settings,
press [F3] (GO).
The audio data will now be erased, and when the
message "Complete!" appears, it indicates that this
operation has been completed.
9. Press [EXIT/NO] several times to return to the top
screen.
Editing a recorded performance (Track Edit)
109