Switching Track Compressors Between Stereo And Mono (Stereo Link) - Boss BR-1200CD Owner's Manual

Switching track compressors between
stereo and mono (Stereo Link)
If you intend to apply a compressor to a stereo-recorded
track, you will need to align the left and right compressor
settings in order to prevent differences in volume occurring
on the left and right (Stereo Link).
Use the following procedure to turn Stereo Link on and off.
1. Press [COMP].
The Compressor screen will appear.
fig.32-05d
2. Use the track buttons or [CURSOR] to select one or
both tracks from a stereo pair.
3. Press [F2] (LINK ON).
Stereo Link will be toggled between on and off.
• Whenever Stereo Link is turned on, the parameters for
the compressors on both of the linked tracks will use the
same values. When one of these parameters is modified,
the same parameter for the adjacent track will be
automatically and simultaneously modified.
• You can switch on Stereo Link by simultaneously
pressing two adjacent track buttons.
4. If you wish to store the modified settings, save the
current song (p. 70).
Tracks 9/10 and 11/12 are fixed as stereo tracks, and
therefore, Stereo Link will always be on for the
corresponding compressors. It will not be possible to
turn Stereo Link off for these tracks.
Using track-specific compressors (Track Compressor)
129