Erasing Songs (Song Erase) - Boss BR-1200CD Owner's Manual

fig.16-08d
4. Move the cursor to the song to be copied and press [F3]
(GO).
The message "Sure?" will appear.
fig.16-09d
5. Press [ENTER/YES].
Copying of the selected song will now begin.
The lowest unused song number will be assigned to the
song newly created in the copy process.
When copying has finished, the message "Complete!"
will appear and the display will automatically return to
the top screen.
• The message "Save Current?" may appear if you
have recorded new audio data, performed editing,
modified mixer settings in the current song.
If you want to save the current mixer settings, etc.,
before copying, press [ENTER/YES]; if this will not
be necessary, press [EXIT/NO].
If Song Copy is used without first of all saving the
current song, any changes made since the last time it
was saved, including recorded audio data, edits,
mixer settings, and the song patch selection will be
lost. It is important, therefore, that the appropriate
care be taken.
• If the message "Disk Full!" appears during the copy
process, it will indicate that there is insufficient
space on the hard disk to save the copied song.
In such a case, you will not be able to copy your
song until you have deleted unwanted data from the
hard disk.
Organizing your songs

Erasing songs (Song Erase)

Use this function to erase songs from your hard disk.
1. Press [UTILITY].
The Utility Menu screen will appear.
fig.12-12d
2. Move the cursor to the SONG icon and press [ENTER/
YES].
Alternatively, you can press [F2] (SONG) if the SONG
icon is currently displayed.
The Song Menu screen will appear.
fig.16-03d
3. Move the cursor to the ERASE icon and press [ENTER/
YES].
Alternatively, you can press [F2] (ERASE) if the ERASE
icon is currently displayed.
A list of the songs currently stored on the hard disk will
appear.
In addition, an asterisk (*) is used to indicate the song
that is currently loaded.
fig.16-12d
4. Move the cursor to the song to be erased and press [F3]
(GO).
The message "Erase Song OK?" will appear.
fig.16-13d
5. Press [ENTER/YES].
The selected song will be erased.
If you erase the song that is currently loaded, the BR-
1200CD will select and load the song with the lowest
song number.
If no songs remain on the hard disk, a new song will be
created automatically.
111