Protecting A Program - Ricoh Priport JP1030 Operating Instructions Manual

OPERATION
E
Press the { { { { Start} } } } key.
1

Protecting A Program

If you want to prevent someone from
writing over your program, do the
following procedure.
A
While holding down the { { { { Clear/
Stop} } } } key, press the { { { { Program} } } }
key.
B
Enter "1" with the { { { { Number} } } } keys.
38
C
Press the { { { { #} } } } key.
TSLS012N
Note
The numbers of the programs
which are not protected will be
displayed in the guidance dis-
play.
D
Select the program number you
want to protect with the { { { { Number} } } }
keys.
TSLS01RN
E
Press the { { { { #} } } } key.
TSLS01LN
TSLS01TN
TSLS011N
TSLS01TN