Fine Mode-Making Clear Prints - Ricoh Priport JP1030 Operating Instructions Manual

OPERATION
Fine Mode—Making Clear Prints
Use the {Fine} key to make clear
prints.
1
A
Press the { { { { Fine} } } } key to select Fine
mode.
B
Set your originals on the exposure
glass or in the optional document
feeder.
C
Press the { { { { Start} } } } key. Check the
image position of the trial or
proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see
justing The Print Image Position")
or the side table fine adjusting
dial (see
Print Image Position To The Right
Or Left").
12
TSLS019N
TSLS012N
P.8 "Ad-
P.8 "Shifting The
D
Enter the number of prints with
the { { { { Number} } } } keys.
E
Press the { { { { Print} } } } key.
TSLS014N