Table of Contents
Advertisement
8.2 Basic features
Feature/Code
Setting the quick setup
{#}{1}{0}{0}
Setting the date and time
{#}{1}{0}{1}
Setting your logo
{#}{1}{0}{2}
Setting your fax number
{#}{1}{0}{3}
Setting the dialing mode
{#}{1}{2}{0}
Setting flash time
{#}{1}{2}{1}
Changing the LCD
display contrast
{#}{1}{4}{5}
Setting the ringer pattern
{#}{1}{6}{1}
Selection
You can print out the quick fax setup guide and select the desired
receiving mode depending on your situation.
{1} "FAX ONLY" (default): Use only as a fax (page 35).
{2} "DIST. RING": With the Distinctive Ring service (page 39).
{3} "EXT. TAM": With an external telephone answering machine
(page 36).
{4} "TEL ONLY": Mostly phone calls (page 35).
1. Press {MENU}.
2. Press {#}, then {1}{0}{0}.
3. Press {SET}.
4. Press {SET} again to print the quick fax setup guide.
L If you do not wish to print it, press {STOP}.
5. Press {1} to {4} to display the desired setting.
6. Press {SET}.
7. Press {MENU}.
Enter the date and time using the dial keypad. See page 21 for details.
Enter your logo using the dial keypad. See page 22 for details.
Enter your fax number using the dial keypad. See page 24 for details.
See page 20 for details.
The flash time depends on your telephone exchange or host PBX.
{1} "700ms" (default)
{2} "600ms"
{3} "400ms"
{4} "300ms"
{5} "250ms"
{6} "110ms"
{7} "100ms"
{8} "90ms"
Note:
L If the fax machine is connected via a PBX, PBX functions
(transferring a call, etc.) might not work correctly. Consult your PBX
supplier for the correct setting.
{1} "NORMAL" (default): For normal contrast.
{2} "DARKER": Used when the display contrast is too light.
{1} "A" (default)
{2} "B"
{3} "C"
8. Programmable Features
53
Advertisement
Table of Contents
