Table of Contents
Advertisement
2.4 Adjusting volume
{A}{B}
Ringer volume
While the unit is idle, press {A} or {B}.
L If any documents are in the document
entrance, you cannot adjust the volume.
Confirm that there are no documents in the
entrance.
To turn the ringer OFF
1. Press {B} repeatedly to display "RINGER
OFF= OK?".
2. Press {SET}.
L When a call is received, the unit will not
ring and will display "INCOMING CALL".
L To turn the ringer back ON, press {A}.
Ringer pattern
L You can select one of three ringer patterns
(feature #161 on page 53).
Handset receiver volume
While using the handset, press {A} or {B}.
Monitor volume
While using the monitor, press {A} or {B}.
Initial Programming
For assistance, please visit http://www.panasonic.com/consumersupport
2.5 Date and time
You must set the date and time.
{SET}
1
Press {MENU}.
2
Press {#}, then {1}{0}{1}.
3
Press {SET}.
4
Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2005
Press {0}{8} {1}{0} {0}{5}.
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select "AM" or
"PM".
Example: 10:15PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
2. Press {*} repeatedly to display "PM".
6
Press {SET}.
7
Press {MENU} to exit.
{MENU}
{<}{>}
SYSTEM SETUP
PRESS NAVI.[( )]
SET DATE & TIME
PRESS SET
L The cursor (|) will appear on the display.
M:|
TIME: 12:00AM
M:08/D:10/Y:05
TIME:
M:|
TIME: 10:15AM
M:|
TIME: 10:15PM
SETUP ITEM [
2. Preparation
{SET}
0 1/D:01/Y:05
1 2:00AM
|
0 8/D:10/Y:05
0 8/D:10/Y:05
]
21
Advertisement
Table of Contents
