Table of Contents
Advertisement
8.2 Basic features
Feature/Code
Setting the date and time
{#}{1}{0}{1}
Setting your logo
{#}{1}{0}{2}
Setting your fax number
{#}{1}{0}{3}
Setting recall/flash time
{#}{1}{2}{1}
Changing the password for
feature programming via
remote operation
{#}{1}{5}{5}
Setting the toner
maintenance time
{#}{1}{5}{8}
Setting the ringer pattern
{#}{1}{6}{1}
Selection
Enter the date and time using the dial keypad. See page 23 for details.
Enter your logo using the dial keypad. See page 23 for details.
Enter your fax number using the dial keypad. See page 24 for details.
The recall/flash time depends on your telephone exchange or host PBX.
{0} "900ms"
{1} "700ms"
{2} "600ms"
{3} "400ms"
{4} "300ms"
{5} "250ms"
{6} "200ms"
{7} "160ms"
{8} "110ms"
{9} "100ms" (default)
{*} "90ms"
{#} "80ms"
Note:
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
1. {Menu} i {#}{1}{5}{5} i {Set}
2. Enter the current password. i {Set}
L The default password is "1234".
3. Enter a new 4-digit password using 0–9. i {Set}
4. Enter the new password again. i {Set} i {Menu}
Note:
L It is recommended that you change this password from the default
password.
L This password is also used for feature programming via a web browser.
The unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit's noise
bothers you, you can change the start time.
1. {Menu} i {#}{1}{5}{8} i {Set}
2. Enter the maintenance start time.
L If you selected 12-hour time entry (page 23), the default time is
"12:00AM". Press {*} repeatedly to select AM or PM.
L If you selected 24-hour time entry (page 23), the default time is
"00:00".
3. {Set} i {Menu}
{1} "A" (default)
{2} "B"
{3} "C"
8. Programmable Features
59
Advertisement
Table of Contents
