Table of Contents
Advertisement
6. Programmable Features
6.2 Basic features
Feature/Code
Setting the date and time
MBNM1NM0NM1N
Selecting the language
MBNM1NM1NM0N
Changing the LCD display
contrast
MBNM1NM4NM5N
Selecting the scale
MBNM1NM4NM7N
Changing the administrator
code for mode restriction
settings
MBNM1NM5NM1N
Setting the mode restriction
MBNM1NM5NM4N
Changing the password for
feature programming via
remote operation
MBNM1NM5NM5N
38
Selection
Enter the date and time using the dial keypad. See page 18 for details.
The display and reports will be in the selected language.
KX-MB2001G:
M1N "ENGLISH", M2N "GERMAN" (default)
KX-MB2001GX/KX-MB2011GX:
M1N "ENGLISH" (default), M2N "DUTCH", M3N "FRENCH",
M4N "ITALIAN", M5N "PORTUGUESE", M6N "SPANISH"
KX-MB2001FR:
M1N "ENGLISH", M2N "FRENCH" (default)
1. MMenuN A MBNM1NM1NM0N
2. Select the desired language using the dial keypad. A MSetN A MMenuN
FOR ENGLISH USERS:
If you want to change the language setting to English, proceed as follows.
1. MMenuN A MBNM1NM1NM0N
2. Press M1N to select English. A MSetN A MMenuN
M1N "NORMAL" (default)
M2N "DARKER"
M1N "MILLIMETRES" (default)
M2N "INCHES"
Note:
R The selected scale will be used when measurements are shown on the
unit's display.
1. MMenuN A MBNM1NM5NM1N A MSetN
2. Enter the current administrator code. A MSetN
R The default administrator code is "0000".
3. Enter a new 4–digit administrator code using 0–9. A MSetN
4. Enter the new administrator code again. A MSetN A MMenuN
Note:
R It is recommended that you change this administrator code from the default
administrator code.
See page 51 for details.
1. MMenuN A MBNM1NM5NM5N A MSetN
2. Enter the current password. A MSetN
R The default password is "1234".
3. Enter a new 4-digit password using 0–9. A MSetN
4. Enter the new password again. A MSetN A MMenuN
Note:
R It is recommended that you change this password from the default
password.
R This password is also used for feature programming via a web browser (LAN
connection only).
Advertisement
Table of Contents
