Table of Contents
Advertisement
Feature/Code
Receiving other size
documents
{#}{4}{3}{2}
Changing the fax
activation code
{#}{4}{3}{4}
Setting the memory
reception alert
{#}{4}{3}{7}
Setting friendly reception
{#}{4}{3}{8}
Receiving a fax into the
computer
{#}{4}{4}{2}
Selection
To receive a fax document that is longer than your recording paper.
{0} "OFF": The unit will print the original size.
{1} "ON" (default): The unit will fit received documents onto your
recording paper.
If you wish to use an extension telephone to receive faxes, activate this
feature and program the activation code.
Important:
L The fax activation code must be different from the code that
you programmed on the answering machine.
{0} "OFF"
{1} "ON" (default)
1. Press {MENU}.
2. Press {#}, then {4}{3}{4}.
3. Press {1} to select "ON".
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is ";#9".
L Do not enter "0000".
6. Press {SET}.
7. Press {MENU}.
To alert you with a beeping sound when a received fax document is
stored into memory due to some existing problem.
The slow beeps will continue until you clear the printing problem and
make sure the unit is supplied with enough paper to print the stored
document.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will be alerted to a reception problem by a
beeping sound.
To receive a fax automatically when you answer a call and hear a fax
calling tone (slow beep).
{0} "OFF": You have to press {FAX START} for fax reception.
{1} "ON" (default): You do not have to press {FAX START} for fax
reception.
If you wish to receive a fax into the computer, activate this feature.
{0} "OFF" (default): Deactivates this feature.
{1} "ALWAYS": If the unit recognizes the connection to the computer, it
will transfer a received document to the computer. If the unit cannot
recognize the connection, it will store a received document in the
memory once, then transfer the data after recognition of the
connection.
{2} "CONNECTED": If the unit recognizes the connection to the
computer, it will transfer a received document to the computer. If the
unit cannot recognize the connection, it will print out the data.
8. Programmable Features
57
Advertisement
Table of Contents
