Table of Contents
Advertisement
9.2 Basic features
Feature/Code
Setting the date and time
MBNM1NM0NM1N
Setting your logo
MBNM1NM0NM2N
Setting your fax number
MBNM1NM0NM3N
Setting the dialling mode
MBNM1NM2NM0N
Setting recall/flash time
MBNM1NM2NM1N
Changing the LCD display
contrast
MBNM1NM4NM5N
Selecting the scale
MBNM1NM4NM7N
Changing the password for
feature programming via
remote operation
MBNM1NM5NM5N
Selection
Enter the date and time using the dial keypad. See page 22 for details.
Enter your logo using the dial keypad. See page 22 for details.
Enter your fax number using the dial keypad. See page 23 for details.
M1N "PULSE"
M2N "TONE" (default)
See page 18 for details.
The recall/flash time depends on your telephone exchange or host PBX.
M0N "900ms"
M1N "700ms" (default)
M2N "600ms"
M3N "400ms"
M4N "300ms"
M5N "250ms"
M6N "200ms"
M7N "160ms"
M8N "110ms"
M9N "100ms"
MGN "90ms"
MBN "80ms"
Note:
R If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
M1N "NORMAL" (default)
M2N "DARKER"
M1N "MILLIMETRES" (default)
M2N "INCHES"
Note:
R The selected scale will be used when measurements are shown on the
unit's display.
1. MMenuN A MBNM1NM5NM5N A MSetN
2. Enter the current password. A MSetN
R The default password is "1234".
3. Enter a new 4-digit password using 0–9. A MSetN
4. Enter the new password again. A MSetN A MMenuN
Note:
R It is recommended that you change this password from the default
password.
R This password is also used for feature programming via a web browser
(KX-MB2030, LAN connection only).
9. Programmable Features
57
Advertisement
Table of Contents
