Hussmann Ingersoll Rand User Manual page 346

1. When the IR Impact
application liquid injection must be installed.
2. Kits are available for 120 volt and 208/230-volt control circuits, and include a Y1037 regulating valve
and a solenoid valve with coil.
3. Installer must supply copper tubing, connections and shut off valve to the liquid header.
IR4C1480
IR4C1761-IR4C2067
IR4C2397-IR4B3139
IR4B3604-IR6B4060
IR4C1480
IR4C1761-IR4C2067
IR4C2397-IR4B3139
IR4B3604-IR6B4060
IR4C1480
IR4C1761-IR4C2067
IR4C2397-IR4B3139
IR4B3604-IR6B4060
Hussmann Aftermarket
Liquid Injection Requirements
™
Compressor is used in an R22 low temperature
Inject Cool Kits
CU.4220194
CU.4220195
CU.4220196
CU.4220197
CU.4220201
CU.4220202
CU.4220203
CU.4220204
Inject Cool Valves Only
CU.4220208
CU.4220209
CU.4220210
CU.4220211
page 18 of 18
KIT INJECT COOL 120V
KIT INJECT COOL 120V
KIT INJECT COOL 120V
KIT INJECT COOL 120V
KIT INJECT COOL 208V
KIT INJECT COOL 208V
KIT INJECT COOL 208V
KIT INJECT COOL 208V
INJECT COOL Valve
INJECT COOL Valve
INJECT COOL Valve
INJECT COOL Valve
4/7/2006