Hussmann Ingersoll Rand User Manual page 236

Installation and Start-up Instructions
These instructions and procedures are for Ingersoll-Rand
reciprocating compressors. Please read these instructions carefully before installing or
operating these compressors, and retain these instructions for future reference.
Safety
Authorized staff
Only qualified and authorized refrigeration personnel shall carry out work on
compressors and refrigeration systems.
Residual Hazards
The compressors are constructed with state of the art processes, standards, and
regulations. Particular emphasis has been placed on user safety. Certain residual hazards
are unavoidable; therefore anyone working on these units should read and understand
these Operating Instructions.
The following standards have procedures that should be followed when installing and
operating Ingersoll Rand
Specific safety regulations and standards (UL 1995 and ANSI/ASHRAE 15),
Generally acknowledged safety standards
NFPA – National Fire Protection Agency
NEC - National Electric Code
General Safety References
Safety references are instructions intended to prevent hazards.
Safety instructions must be stringently observed.
Attention!
Instructions on preventing possible damage to equipment.
Caution!
Instructions on preventing a possible minor hazard to persons.
Warning!
Instructions on preventing a possible severe hazard to persons.
Danger!
Instructions on preventing an immediate risk of severe hazard to persons.
Installation and Start-up
Impact semi-hermetic reciprocating compressors:
2
Impact semi-hermetic