Installing Adaptec Easy Cd Creator; Steps To Install Adaptec Easy Cd Creator Software - HP Compaq Presario,Presario 5000 User Manual

Installing
Adaptec Easy CD
Creator
Tip
You must close all other
Windows programs before
installing Adaptec Easy CD
Creator.
Tip
Installation is only required
when Easy CD Creator is not
pre-installed or if you had to
restore your computer to the
original factory condition.
Did you know ...
Internet Explorer 4.01 or
higher must be installed on
your system before you can
install Easy CD Creator. If
Internet Explorer is not found
on your system, you are
prompted to install Internet
Explorer 5 before continuing
with Easy CD Creator
installation.
4-4 C Y O
REATING OUR WN

Installing Adaptec Easy CD Creator

Steps to Install Adaptec Easy CD Creator
Software
L
1. Insert the Adaptec Easy CD Creator disc into the CD-RW,
DVD-ROM, or CD-ROM drive and complete the following
steps to install the Adaptec Easy CD Creator software.
Note: You must follow these instructions to install both Easy CD Creator
and Direct CD.
If Autorun is enabled on your system, the Adaptec
Installation window is displayed automatically and you can
skip steps 2 and 3.
2. From the Start menu, select Run.
3. Type e:\setup (substitute "e" for the appropriate drive letter
of your CD-RW, CD-ROM, or DVD-ROM drive).
4. From the Adaptec Installation window, select Easy CD
Creator and the desired language.
5. Follow the installation instructions that are displayed on the
screen.
6. When the installation is complete, click Finish. The Adaptec
Installation window is displayed again (repeat steps 4-6 to
install DirectCD).
7. Click Exit to exit the Adaptec Installation window.
8. Restart your computer when prompted so the changes take
effect.
CD
S
Caution: Before installing Adaptec Easy CD Creator, you must
uninstall any other CD recording software. This includes deleting all
shared files if prompted to do so.
M P —L M
Y RESARIO EARNING ORE