HP Compaq Presario,Presario 5000 User Manual page 46

Creating an
Audio CD
(continued)
M P —L M
Y RESARIO EARNING
6. Highlight the tracks you want to record. Either click the Add
button or click and drag the desired tracks (songs) to the CD
Layout window. You may also record tracks from other
sources, such as your hard drive, by using the Find Files
button or by using the Explorer window.
Note: If you have tracks on other music CDs that you want to record,
repeat steps 4-6 for each music CD from which you want to record.
During the actual recording process, Easy CD Creator prompts you to
reinsert the appropriate music CD for the track being recorded.
7. When you have organized your tracks (WAV or MP3) in the
CD Layout section and you are ready to record, click the
Create CD button. The CD Creation Setup box is displayed.
The CD Creation Setup box allows you to see the target
device (the destination drive or drive you will be recording
to), the write speed, and the number of copies. If you would
like to view more of the recording options, click on the
Advanced button. The default settings are as follows: Create
CD, Track-at-Once, Leave Session Open.
8. When you have made your selection, click OK.
9. When you finish recording to your disc, you can either
record additional tracks later if you didn't close the CD, or
you can close the CD.
10. When you click OK, you return to the CD Layout window.
11. If you plan to record additional tracks, delete all previously
recorded tracks that are in the CD Layout window and repeat
Steps 6 through 10.
12. When you are finished recording to your CD, click the
Create CD button, select Close CD, and click OK. (When
you have closed the CD, no additional tracks can be recorded
to it).
L
ORE
Caution: When you choose to close/finalize a disc, the CD-RW
drive tray ejects and then retracts during the closing process.
C Y O CD
REATING OUR WN S
4-7