Output Tray; Copies - Gestetner P7245 Hardware Manual

UNIX Configuration

Output Tray

Select the output tray.
1
outbin=value of output tray
Important
❒ Only installed output trays are available.
Value
upper, inner, lower, finisherproof, finishershift, finisherbooklet, optionaloutbin1~12
Reference
For details about available output tray, see the manual that comes with this
machine.
The following sample shows how to print to the standard tray (standard tray:
upper, host name: nphost, file name: file1):
• rsh
% rsh nphost print outbin=upper < file1
• rcp
% rcp file1 nphost:outbin=upper
• ftp
ftp> put file1 outbin=upper

Copies

Specify the number of copies.
copies=number of copies (1 to 9999)
Important
❒ Do not specify "copies" and "qty
*1
"qty" specifies the number of collated sets.
The following sample shows how to print 10 copies (host name: nphost, file
name: file1):
• rsh
% rsh nphost print copies=10 < file1
• rcp
% rcp file1 nphost:copies=10
• ftp
ftp> put file1 copies=10
26
*1
" commands at the same time.