Staple - Gestetner P7245 Hardware Manual

Staple

Select the staple position for the output.
Important
❒ When using this option, the optional finisher unit is required.
staple=value of staple position
Position
Off
Left top
Right top
Left top horiz
Left top slant
Left top vert
Right top horiz
Right top slant
Right top vert
Left 2
Right 2
Top 2
Booklet
The following sample shows how to print with the staple on the upper left using
finisher shift tray (host name : nphost, file name : file1, finisher shift tray: finish-
erproof):
• rsh
% rsh nphost print staple=lefttop,outbin=finisherproof <
file1
• rcp
% rcp file1 nphost:staple=lefttop,outbin=finisherproof
• ftp
ftp> put file1 staple=lefttop,outbin=finisherproof
Note
❒ Available staple positions vary depending on type of installed output tray.
For details about staple, see the manual that comes with this machine.
Specifying the Device Option
Value
off
lefttop
righttop
lefttophorizland, lefttophorizport
lefttopslantland, lefttopslantlport
lefttopvertland, lefttopvertport
righttophorizland, righttophorizport
righttopslantland, righttopslantport
righttopvertland, righttopvertport
left2land, left2port
right2land, right2port
top2land, top2port
booklet
1
31